Canadian Provinces
BNQ Certification
The Advanced Enviro-Septic™ Treatment System has been certified by the Bureau de Normalisation du Québec under the NQ-3680-910 standard (classIII certification, secondary advanced treatment level) (Wastewater Treatment - Stand-Alone Wastewater Treatment Systems for Isolated Dwellings).
This certification allows the system to be used in:
- Quebec
- British Columbia (recognizes the certification above and allows Advanced Enviro-Septic™ to be used as a type 2 treatment system)
Additional Approvals and Authorizations
Ontario: Advanced Enviro-Septic™ (AES) received a BMEC (Building Material Evaluation Commission) authorization # 08-03-340 for use as an alternative to a “Class 4 Wastewater treatment System” regulated under section 8.6, division B of the Ontario Building Code.
New Brunswick: AES must be approved project by project by the health inspector for each site. BNQ certification is used to support permit applications.
Manitoba: AES received a letter of authorization for demonstration sites. Approval is valid for 3 years as long as a performance measured report is filed after 2 years of use.
Alberta: An Engineered design is required for an AES System on a site by site approval basis. THe BNQ certification is used to support permit applications.
Saskatchewan: Allows installation of Advanced Enviro-Septic™ Treatment System since it has been certified by a recognized body (BNQ).
If you are interested in having an Advanced Enviro-Septic™ Treatment System installed on your site, please contact our Distributor, DBO Expert Inc. at one of the following:
Tel.: (819) 846-3642
Fax: (819) 846-2135
Email:info@Enviro-Septic.com
Website: www.Enviro-Septic.com