- Sand Analysis Labs
- Sand Suppliers
- Training and Certification
- Associations/Trade Shows
Advanced Enviro-Septic® now approved in the state of Georgia:
We are proud to introduce the Advanced Enviro-Septic® Treatment System (“AES”) in Georgia. Advanced Enviro-Septic® is the next generation of our effective and reliable Enviro-Septic® technology; it has received Class I Certification under NSF International/ANSI’s Standard 40 for Wastewater Treatment Devices. The AES product is also approved for non-NSF Certified installations in Georgia. The reduced bed size of the Advanced Enviro-Septic® will allow it to be approximately 75% smaller than traditional stone trench systems.
- 12 & 24 inch separation from system sand bottom to restrictive layer.
- 24 inch separation equals 50% reduction in trench and bed sizing
- Smaller footprint = Reduced fill material.
- Affordable, passive wastewater treatment that works great in intermittent situations.
Dealers and distributors:
Bron Bradley is the authorized certification course instructor as well as the Georgia distributor for Advanced Enviro-Septic®. For information regarding design, installation, and sales locations please contact Bron Bradley at 256-706-7941 or email [email protected]
We require individuals who wish to design or install an Advanced Enviro-Septic® be certified by attending the Advanced Enviro-Septic® Design and Installation Certification Class. The class offers various design and installation configurations, troubleshooting techniques and tricks of the trade. To view the class schedule and certification options click on the ‘Training and Certification’ tab above.
Advanced Enviro-Septic® has been approved for use throughout the State of Georgia.
Sorry - none currently listed
In Georgia, we require certification for all designers and installers. The classes are a great way to learn more about our product, even if you are not seeking certification. We strongly recommend regulators involved in the review and inspection of Advanced Enviro-Septic® systems take the certification training.
As part of certification, an assessment test is required. This should be taken only after viewing the class videos and reading the Georgia Design and Installation Manual. The test is open book and is not timed. A passing score of 70% is required for certification.
Online Certification Classes
DVD Certification Classes
Online Certification Test
After viewing the reading materials and training videos, follow the link below to the assessment test. We highly recommend that you download and print the Required Reading materials for the open book test which is not timed. If you receive a score of 70% or better, you will be emailed a copy of your Presby Certification Certificate, provided you give correct and accurate contact information to ensure proper certification. Please allow ten business days to process your test and deliver your certification.
The assessment test is only offered online. If you have special needs contact our Training Coordinator at 800-473-5298 x26.